NAND Test Rack Programmer Automatic Generation of Serial Number Wifi Bluetooth etc for iPad 5 /iPad Air / iPad 6 / iPad Air 2
Has been tested to support for ipad5/6
Known for ipad 5/6 TOSHIBA 32G THGBX2G8B4JLA01 does not support for the time being.
Known for ipad 5/6 Toshiba 64G THGBX4G9T4KLF0C temporarily does not support
for SanDisk 64G SDMILBCF4 temporarily does not support
iPad 5/6 SDMILBCF4 does not support
iPad 5/6 H2JTFG8PD1MMR does not support
Steps for use
Select to install 32-bit or 64-bit driver according to your own windows operating system
Use the supplied usb cable to connect to the computer
After the instrument driver is automatically installed, you can open the software: PAD_5_6.exe
Select padAir (pad5) or padAir2 (pad6) according to pad model
Remove the glue from the bottom of the main board and put the main board into the instrument
Click on the hard disk test If the communication is normal, the software window will display the hard disk model information
Click to read the information At this time read the original serial number of the main board, regional information
Click to generate, you can generate a new serial number and other information in one click. After you have determined that there is no ID through the query, you can use Update All to complete the operation.
If you use the generate code to activate, due to the code is randomly generated. It is not guaranteed that all 100% can be used. If it cannot be activated, please regenerate and try again. Recommend use yours no icloud id code.