BAKU Solder Wick Remover Desoldering Braid Flux Roll 1.5mm 2.0mm 2.5mm 3mm for BGA Soldering

This 4 size available BK-1515, BK-2015, BK-2515, BK3015

package included : 10pcs solder wick 

WARNING

-Only touch and the pack of desoldering wick when desoldering.Failure to do so will result in serious bums.

-To avoid fire,never use a soldering iron and desoldering wick around combustible or in an explosive environment.

CAUTION

-Do not force the tip against the desoldering wick to avoid into yourself or damage to the parts and PCB

-Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB

HOW TO USE

1.Place the desoldering wick over the solder to be removed,then push the heated soldering iron tip onto

the desoldering wick.The solder will be absorbed.

2.Remove the desoldering wick after the solder has been absorbed.

3.Cut off the used section of the wick using inppers

4.Repeat steps 1,2 and 3 if the solder is not removed completely.

Absorbability may differ depending on the type of solder.Sn63% and 60%(tin content)have good absorbability.