i2c host with flex cables.jpg thumb

i2C Face ID V8 Programmer Fixture for iPhone X / Xs / Xs Max / 11 / 11 Pro / 11 Pro Max

  • (0) Review

i2C Face ID V8 Programmer Fixture for iPhone X / Xs / Xs Max / 11 / 11 Pro / 11 Pro Max Features: Offline read & write Support models: For iPhone X/XR/XS/XS Max/11/11 Pro/11 Pro Max Support Chinese & English menu switch Non-trace repair, green pass the


Types:

  • $138.08
  • Quantity Price
    1- 8 $138.08

Quantity

  • Add to Wishlist

Categories: Flash & Unlock/ Cables and Adapters/ Adapters

Notice:
1: After order, contact us for confirmation;
2: The flex cable can only be used with the IFace V8  programmer;
3: The  flex cable  cannot be used separately;
4: If there is no programmer, the  flex cable  can not be used.

 

i2C Face ID V8 Programmer Fixture for iPhone X / Xs / Xs Max / 11 / 11 Pro /  11 Pro Max

Features: 
  • Offline read & write
  • Support models: For iPhone X/XR/XS/XS Max/11/11 Pro/11 Pro Max
  • Support Chinese & English menu switch
  • Non-trace repair, green pass the 3UTools
  • Chip non-removal low repair risk
  • Low power consumption and no current leakage
  • Can be adapted to the latest iOS system perfectly

Operation Process
  1. Connect with original flex cable, press ‘Test’ button to test the flex cable condition
  1. Press the ‘Read’ button to read and save the data (Do not power off during the operation process to avoid loss of data )
  1. Connect the i2C dot projector flex cable with the host machine, then press the ‘Write’ button to write the data. (Do not power off during the operation process to avoid loss of data)
  1. Cut off the shielding cover soldering joint pads with a grinding pen
  1. Heat with a hot air gun and separate the dot projector board from the glass lens with a sculpture knife
  1. Takedown the MOSFET then short the pin as shown in the figure
  1. Reball the pads on the flex cable
  1. Apply solder paste then solder the dot projector board to the flex cable
  1. Test the flex cable working condition after the soldering
  1. Put the flex cable into the shielding cover and keep the flex well aligned with the glass lens

Package includes:
1 x I2C Face ID V8 Programmer Fixture 
i2C Face ID V8 Programmer Fixture for iPhone X / Xs / Xs Max / 11 / 11 Pro /  11 Pro Max

Features: 
  • Offline read & write
  • Support models: For iPhone X/XR/XS/XS Max/11/11 Pro/11 Pro Max
  • Support Chinese & English menu switch
  • Non-trace repair, green pass the 3UTools
  • Chip non-removal low repair risk
  • Low power consumption and no current leakage
  • Can be adapted to the latest iOS system perfectly

Operation Process
  1. Connect with original flex cable, press ‘Test’ button to test the flex cable condition
  1. Press the ‘Read’ button to read and save the data (Do not power off during the operation process to avoid loss of data )
  1. Connect the i2C dot projector flex cable with the host machine, then press the ‘Write’ button to write the data. (Do not power off during the operation process to avoid loss of data)
  1. Cut off the shielding cover soldering joint pads with a grinding pen
  1. Heat with a hot air gun and separate the dot projector board from the glass lens with a sculpture knife
  1. Takedown the MOSFET then short the pin as shown in the figure
  1. Reball the pads on the flex cable
  1. Apply solder paste then solder the dot projector board to the flex cable
  1. Test the flex cable working condition after the soldering
  1. Put the flex cable into the shielding cover and keep the flex well aligned with the glass lens

Package includes:
1 x I2C Face ID V8 Programmer Fixture 
Please Login / Signup to add your review

subscribe to our newsletter

Product Added to cart Successfully!! Go To Cart